BSL logo



BDM - Black Diamond Mines Park, Antioch, CA, USA

Black Diamond Mines Regional Park

Black Diamond Mines Regional Park

1998/11/12 00:00:00 - Present

Latitude: 37.9540
Longitude: -121.8655
Elevation: 219.80 meters

View of equipment rack at BDM

View of equipment rack at BDM

Location | Geology | Vault Conditions
Instrumentation | Network | Operation Notes
Noise Characteristics | Data Availability

Location:
Site is located south of Antioch, California, in a former lignite and sand mine in the Black Diamond Mines Regional Park, under the auspices of the East Bay Regional Park District.

Geology:
Sand

Vault/Borehole conditions:
The instruments are sited approximately 150 meters into an old mine tunnel. There is a ~100 meter overburden composed of sandstone, shale, and coal, which limits thermal fluctuations. In addition, 7 centimeters of foam cover the instruments.

Instrumentation:
SensorDataloggerStart DateEnd DateSEED ChannelsLocation
Battery VoltageQ41202003/06/30PresentUE?,LE?
Internal TemperatureQ41202003/06/30PresentUK?
Kinemetrics FBA ES-T Accel. (2 g max 10 v/g)Q41201998/11/121998/12/03HL?,LL?,BL?
Kinemetrics FBA-23 Accel. (2 g max 1.25 v/g)Q41201998/12/03PresentBL?,LL?,HL?
Motorola MPX201 PressureQ41201998/11/12PresentLD?
Streckeisen STS-2 VBB Tri-Axial SeismometerQ41201998/11/12PresentBH?,HH?,LH?,UH?,VH?
Streckeisen STS-2 VBB Tri-Axial SeismometerQ41202003/06/30PresentUM?
YSI 44031 ThermistorQ41201998/11/12PresentLK?

Network:
BK (Berkeley Digital Seismic Network)

Operation Notes: (may not be current)
This section summarizes major changes in equipment or in instrumentation at BDM.

  • 06/15/2004 BH channel sampling rate changed from 20 Hz to 40 Hz.
  • 08/20/2003 Q4120 upgraded with signal/power cable and mass position signal.
  • 07/01/2003 Upgraded Q4120 configuration to have causal filter at 100 Hz.
  • 09/28/2001 Power system replaced.
  • 08/15/2001 We are experiencing power problems at this site and intend to replace the power system. In the mean time, data may contain gaps due to power loss at the site.
  • 08/25/2000 Telecommunications problem (due to work at Park) fixed. Telemetry resumed.
  • 08/08/2000 Q4120 datalogger reinstalled.
  • 05/17/2000 Q4120 datalogger removed, due to failure of digitizer board.
  • 12/29/1999 New MSHEAR software installed, to change filters from causal to acausal.
  • 12/03/1999 New Q4120 installed (actually, the repaired original) with MSHEAR software.
  • 09/30/1999 Q4120 datalogger replaced with new Q4120, due to digitizer failure.
  • 12/03/1998 FBA-23 accelerometer installed, replacing FBA-ES-T.
  • 11/24/1998 Data from BDM archived from this date.
  • 11/12/1998 STS-2 and FBA-ES-T installed with Quanterra Q4120 datalogger.

Noise Characteristics:
The figures below are cumulative plots of power spectral density (psd) determined from the broadband channels. In each figure, the vertical component psd is plotted with blue diamonds, the north component psd with red squares, and the east component psd with green circles. The results are presented in the 5 different frequency bands, and the USGS/Albuquerque low noise model is plotted as a dashed line in each. The PSD units are in dB (decibel) relative to 1 (m/s**2)**2/Hz. The current annual plot is updated weekly.

Cumulative PSD results
1999 2000 2001 2002 2003 2004 2005
1999 PSD 2000 PSD 2001 PSD 2002 PSD 2003 PSD 2004 PSD 2005 PSD

Data Availability:
BDSN waveforms and associated metadata are available at the Northern California Earthquake Data Center (NCEDC).

Several tools provide access to SEED format data at the NCEDC, both in terms of querying the archives and allowing data requests.

Help on using these tools is available.

BDSN Overview | Map | Table



Berkeley Seismological Lab
215 McCone Hall, UC Berkeley
Berkeley CA 94720-4760
www@seismo.berkeley.edu

UC Berkeley seal

Copyright 1995-2005, The Regents of the University of California.
Last modified: Wed Jun 25 13:34:08 PDT 2008